Fixing a dead dot matrix display board

The other day the DMD just went “poof” on one of my machines.  After doing a little research, and checking connections and things, I realized the DMD board died.  In this installment, I walk through the process of rebuilding the power supply-portion of a Bally/Williams WPC DMD board.  In part 1 I describe what I’m doing and introduce you to the tools I’m using.

 

Next up, let’s talk about using a meter to check circuit board traces as we go along..

Desoldering and replacing components.

Now the moment of truth!  One thing I want to add is pay very close attention to each item you are replacing on these boards.  Two diodes, capacitors or transistors may look alike, but have slightly different values or part #s.  The three power transistors and the diodes are not all the same.  You may have to bust out a magnifying glass to note the different in the markings on each part.  This should also be cross-referenced with the schematics and/or parts list from the game manual.