I’ve encountered an odd problem with this Stern Walking Dead pinball game. The sound completely went out. But there is not a dedicated sound board. So what do you do? It’s a lot scarier than one would think…. This is part one describing what’s going on and what I’m doing about it…
In this latest episode I deal with a sound problem on our Mr & Mrs Pac Man pinball machine. The sound and speech is intermittent and low in volume.
When dealing with any game that is 30 or more years old, you can bet that the capacitors are suspect. These electronic components are known to go bad over time, since they have liquid inside that can dry up, or leak out. It’s relatively easy to acquire and replace the components provided you have the right tools, and then you insure your game board will ideally last another 30 years.
In the video one thing to note is you aren’t always limited to having to find the exact same value/model capacitor. You can replace a capacitor with a lower voltage rating with one of a higher voltage rating. (i.e. replace a 25v cap with a 50v) But you want to make sure the capacitance value (in farads or microfarads) remains the same. You can also replace an axial cap (one with the leads coming out of each end) with a radial cap (with both leads coming out from just one end) as long as you get the polarity properly oriented. Make sure you note that markings usually point to the negative lead, while an indentation on one side of a capacitor will mark the positive lead.
After replacing the caps, we still have some flakyness with the speech portion of the board. I’ve got some replacement pots on order – when they come in I will check on the board traces and solder joints and probably replace that pot… stay tuned and thanks for following the saga!